MARC 42 WHITE LIGHTNING
A high speed floor finish especially designed for daily, high speed burnishing.
Has high gloss, high durability, excellent mark and scuff resistance and responds well to
high or low speed buffing. Withstands daily high speed burnishing with electric or propane
buffers without excessive powdering or wear.
MARC 43 "THERMAL LOCK"
A metal-interlocked high-speed buffable floor finish. Has excellent gloss and
excellent response to buffing. Outstanding wear properties.
MARC 45 HIGH SPEED RESTORER
Softens high-speed finishes to give the "wet look" when buffed.
Brings the finish back to life. Very economical and easy to use.
MARC 224 TARTAN FLOOR SEALER/FINISH
Especially designed for rubber or synthetic gym floors. Combines excellent
gloss with exceptional wear for balanced performance. Both seals and finishes.
MARC 237
"IMPRESSION" VINYL TILE GYM FINISH
Especially formulated for conditions found in vinyl tile gyms. Will stand up
without becoming slippery. Dries to a clear, high gloss without buffing. May be buffed to
maintain shine.
MARC 238 FAST BREAK
This is a one-part self-crosslinking water-based acrylic hybrid gym finish for wood
floors. It has a performance equal to solvent-based oil-modified finishes, with high
gloss, excellent durability and excellent resistance to stains, marking and scuffing.
Under normal conditions, it drys in several hours. Minimal floor preparation
using MARC 826 Gym Conditioning
Pads is required.
MARC 240 PROTON FLOOR FINISH
A 22% solids low maintenance dry-brite floor finish with high initial gloss and high depth
of gloss. Nanotechnology allows it to have outstanding wear, scuff, black mark and
scrub-resistant properties. Does not require buffing, but may be buffed occasionally
for an even higher shine. Excellent price.
MARC 241 "ALWAYS"
No buffing required. A zinc cross-linked polymer which dries to a beautiful
high gloss luster. Is slip retardant and highly resistant to scuffing, marking and
detergent. Specially formulated for high traffic areas. Self-leveling.
MARC 246 DEPTH CHARGE SPRAY BUFF
A ready-to-use product for spray buffing and cleaning. To clean moderately dirty
floors, spray on floor, use a cleaning pad and then buff to a high gloss with a polishing
pad. For light or no soil, spray and buff with a polishing pad (300 to 3000 rpm
machines).
MARC 248 HIGH FIVE HIGH
SOLIDS FLOOR FINISH
Very high initial gloss with excellent response to buffing and outstanding
detergent resistance. Based on a new technology that maximizes gloss while still
providing the highest level of durability and ease of application. When buffed or
burnished, MARC High Five "snaps back" to have a high gloss "wet
look."
MARC 251 "SPRAY BUFF
PLUS"
A spray buff product formulated especially for use on high speed floor
finishes. Restores the shine while removing black marks and scuff marks.
MARC 260 POLYURETHANE GYM FINISH
A ready-to-use polyurethane finish with excellent durability, high luster,
mark resistance, and excellent gloss retention.
MARC 260-M MFMA-APPROVED
POLYURETHANE GYM FINISH
A ready-to-use polyurethane finish approved by the Maple Flooring Manufacturers'
Association. Meets all standards set for Group 3 Surface Finishes. Has high
gloss, excellent durability and is slip-resistant.
MARC 269 HI-SOLIDS POLYURETHANE
GYM FINISH
A 51% solids VOC-compliant gym finish with excellent durability, high luster, mark
resistance and excellent gloss retention.
MARC
270 TOP NOTCH
This is a 32% ultra-high solids floor finish with outstanding inital gloss, extreme
durability and excellent buffability. It is easy to apply and self-sealing.
The high solids content means less coats need to be applied, resulting in a significant
savings in labor.
MARC 271 "VISION 2000"
A next-generation floor finish for the new millennium, Vision 2000 has high gloss,
high durability, excellent response to buffing, excellent mark resistance, outstanding
leveling and rapid recoating. The level of performance in all areas has been improved over
previous products. Floors finished with Vision 2000 maintain high gloss for longer periods
of time, are easier to coat, dry faster, strip easier and are a more resistant to scuffing
and marking. Floors may be maintained with low or high speed buffing, or just
cleaning. The high gloss and superior durability of Vision 2000 allow for longer intervals
between maintenance.
MARC
275 REBOUND
This is a waterborne oil-modified polyurethane gym finish with all the performance of a
solvent-based finish. It has excellent shine
and durability, and easy floor prep.
MARC 289 FULL COURT FINISH
Single component formula water-based urethane/acrylic wood floor finish.
Contains reactive polymers that offer durability and appearance equal to or greater than
solvent-based oil-modified finishes. Dries in as little as one hour. Gym may
be used in 24 hours. Prepare floor using MARC 287 Full Court Prep and MARC 288 Full Court Cleaner.
Approved by the Maple Flooring Manufacturers Association.
MARC GREEN 709 VICTORY
NON-ZINC FLOOR FINISH
A combination floor finish and sealer that is crosslinked, yet free of zinc, phosphates,
alkyl phenol ethoxylate emulsifiers and phthalate plasticizers. Has a high gloss,
excellent durability and easy recoatability and removability.
See also Sealers.
