Lubricants
MARC Home Page

 

Back Up Next

MARC 100 PEN-A-LUBE (aerosol)
An excellent penetrating lubricant fortified with P.T.F.E. for superior lubrication.   Reduces friction, and stops and prevents rust and corrosion.  Non-flammable formula contains no methylene chloride or ozone-depleting chemicals.

MARC 102 "OPEN LUBE" GEAR LUBRICANT (aerosol)
Lubricates and protects, even under water. Leaves a smooth black adhesive coating on gears, chains and wire rope which withstands high friction and pressure for long-lasting lubrication and rust protection. 

MARC 104 "BREAK-A-WAY" LUBRICANT - PENETRANT (aerosol)
Provides a protective shield against the harmful effects of moisture and corrosion. Displaces water. Non-conducting. 

MARC 114 T-A-P
A triple action penetrant with freezing action to loosen bolts, a lubricant to penetrate deeply and ingredients to dissolve and eat rust.  Non-conducting to 33,000 volts.  Ultra-low VOC formula contains on chlorinated solvents or ozone depleters.

MARC 127 GRAPHITE LUBRICANT (aerosol)
A high temperature, extreme pressure, dry film lubricant. Stops rust and forms an impenetrable rust-proof barrier. Forms a micro-sized film on all smooth and porous metals to assure machining tolerances. 

MARC 147 PENETRATING HI-TACK CLEAR LUBE (aerosol)
Penetrates like an oil and sets up fast to a clear tacky grease-like stringing gel.  Contains Teflon®.  Effective from -30° to +500°F.  Residual moisture-proof barrier prevents rust and corrosion.

MARC 160 PENETRATING RED GREASE (aerosol)
A penetrating liquid that quickly forms a non-tacky grease. Prevents rust. Stable to over 500° F. No chlorinated or fluorinated solvents. 

MARC 161 SILICONE SPRAY (aerosol)
An all-purpose dry lubricant for use on any surface to stop sticking. Eliminates squeaks. Retards corrosion. Waterproofs ignition systems. Dries fast. 

MARC 165 "CUT N TAP" (aerosol)
A cutting, tapping, cooling and lubricating fluid for use with drills, taps and cutting tools. Suitable for practically all metals. Increases production rates and tool life.  
MARC 166 FOAMING CHAIN & CABLE LUBRICANT AND PROTECTANT (aerosol)
Fortified with molybdenum disulfide to provide anti-wear and extreme pressure and temperature resistance. Other special additives provide excellent penetration and rust prevention. 

MARC 167 "PATROL" DRY MOLY LUBRICANT (aerosol)
Non-flammable spray. Forms a thin, fast drying, oil-free black film that clings and gives superior, long-lasting lubrication under extreme pressure or temperature.
 
MARC 170 ANTI LOCK, ANTI-SEIZE COMPOUND WITH APPLICATOR
Non-aerosol pressure applicator eliminates waste.  Protects against galling and seizing.  Provides waterproof lubrication to 2,100ºF.  

MARC 173 TFE LUBE (aerosol)
An all-purpose dry lubricant and release agent made with extremely fine Teflon powder. Odorless, stainless and more slippery than silicone, graphite or oil. 

MARC 189 ULTRA HI-IMPACT GREASE
Specially formulated additives withstand extreme impact and pounding pressure in heavy equipment. Will not spatter or pound out. Resists acids, dirt, water and heat.  

MARC 190 "THERMO-GUARD" NON-MELTING GREASE
A specially formulated all-purpose grease which withstands high heat. Effective under extreme pressure. Superior adhesive and cohesive properties. 

MARC 191 MULTI-VISCOSITY/MULTI-PURPOSE GEAR OIL - SAE 80W-90
Designed for extreme pressure. Special additives distribute lubrication immediately over entire gear train. Highly resistant to corrosion, oxidation, thickening. Use in manual transmissions, differentials, gearboxes. Meets MIL, API and AGMA specs.  

MARC 193 E.P. HEAVY DUTY ALL-SEASON GEAR OIL-80W-90-140
Can be used over a wide temperature range. Improves fuel economy. Prevents rust and corrosion. Increases load capacity. Gives greater heat resistance and lower energy requirements. Meets MIL, API and AGMA specs. 

MARC 194 MOLY GREASE
An all-purpose grease fortified with molybdenum disulfide for superior lubricating properties.  Lasts longer than many conventional greases, and resists most acids, dirt, water, steam and oxidation.  Performs in high temperatures and high loadings.   Also contains special rust and corrosion inhibitors.